Features:
1. The APW3++ can deliver a maximum power of only 1200W if it is connected to a
110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be
connected to a 220-240V mains power supply. Please check the mains power supply
that is the standard in your region before ordering.
2. This batch of PSU comes with only 10 PCIe connectors so cannot be used with
more than one Antminer L3+ miner.
Specifications:
Output
1.DC Voltage:12.15V
2.Rated Current(220V input):133A
3.Rated Current(110V input):100A
4.Rated Power(220V input):1600W
5.Rated Power(110V input):1200W
4.Ripple & Noise:<1%
5.Voltage Regulation:<2%
6.Source Regulation:<1%
7.Load Regulation:<1%
8.Setup, Rise Time:<2s
9.Power off Protection Trip Time:>9mS
10.Interface Type:5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)
11.Noise Level:<43db
Input:
1.Voltage Range:100-240V AC
2.Starting Voltage:95-105V AC
3.Frequency Range:47-63Hz
4.Power Factor:>0.95 (full load)
5.Leakage Current:<1.5mA (220V 50Hz)
Protection
1.Low-voltage Input:80-89V AC
2.Output Short Circuit:Yes
3.Output Overcurrent:134-185A max.
4.Overheat Protection:Yes
Environment Conditions
1.Operating Temperature:-20°C - 50°C
2.Operating Humidity:20% - 90% relative humidity (non-condensing)
Fan:Forced-air cooling
Size:220mm*108mm*62mm
Package Included:
1 x power supply for Antminer S9 for L3