The wireless SYNCO G2(A2) is a two-channel microphone system consisting of two mini transmitters with built-in real wireless omnidirectional microphone capsules, a receiver and an accessory set. Based on 2.4 GHz and improved syncoding technology captures and delivers G2(A2) more stable and clear audio for your DSLR, camcorder, smartphone or tablet. With 2 transmitters. InInInInInInDesign Receiver can process SYNCO G2(A2) simultaneously two-channel audio signals. This system can switch between mono and stereo mode and allows you to record each subject of each transmitter on a separate channel, or signals from both transmitters can be mixed together and recorded identical to the left/right channels. Versatile for two-person recording such as personal interviews, advertising, microfilm. Youtube Video etc.
Note: Press the reset button with the ejector pin for three seconds to reset the microphone.
Based on 2.4GHz spectrum and syncoder 2.0, SYNCO G2(A2) provides interference-free clear and distortion-free sound with a transmission range of 50m (LOS) and a range of 30m (NLOS). The built-in DSP chip optimises audio signal and emits high clear sound.
|
|
|
---|---|---|
Quiet design150Hz LOW-CUT filters out wind, air conditioning, traffic and other specific low-frequency noise. Includes premium windscreen to minimise wind noise and rustling clothing. |
Built-in / external microphoneIt is very easy to use the transmitter as a lavalier microphone or operate it as a traditional pocket transmitter with external lav microphone (included). The mini transmitter can be flexibly attached to clothing, attached to a belt or put in a bag. |
Real-time monitoringWith real-time monitoring via a 3.5mm TRS headphone jack, G2(A2) ensures you track the sound effect and make appropriate adjustments. |
|
|
|
---|---|---|
Reinforcement adjustmentThe amplification adjustment on the receiver has 0-5 levels that you can adjust according to your needs and achieve more precise effects. |
Fast charging and long-term workIt charges easily via breaks, goes from empty to a full charge in just 1.5 hours and has a battery life of up to 8 hours to handle long recordings. The 3-in-1 cable allows you to charge the transmitter and receiver simultaneously. |
Compatible with multiple devicesThe receiver with a 3.5mm TRS audio output that works with the included 3.5mm TRRS telephone cable and 3.5mm TRRS camera cable. It is widely used for devices with 3.5 mm interfaces, e.g. Smartphone, Laptop, DSLR, Tablet, Camcorder and Recorder. |
Transmission type: | Digital 2.4 GHz |
RF frequency band | 2400-2483.5 MHz |
Frequency response | 20 Hz - 20 kHz |
Working distance: | 50 m (LOS range), 30 m (NLOS range) |
Display: | TFT screen |
Power requirements: | 3.3 V - 4.7 V |
Battery type: | Built-in lithium battery, 500 mAh |
Battery charging time | 1.5 hours. |
Battery life | 8 hours. |
Material: | Plastic |
Dimensions: | 52 x 42 x 17 mm |
Weight: | 39 g |
Box contents: | RX receiver x 1, TX transmitter x 2, external lav microphone (with wind protection) x 2, windscreen x 2, 3.5 mm TRRS phone cable x 1, 3.5 mm TRRS camera cable x 1, 3-in-1 charging cable x 1, ejector pin x 1, carry bag x 1 |