The Stabiliser will continuously monitor the incoming mains supply. If the voltage rises or drops, it will automatically control the output voltage - ensuring the voltage reaching the load always remains constant at the required requisite voltage. In addition, inbuilt protection features continuously safeguard the Charger against harmful mains born high energy surges, spikes, and transients.
Technical Specification
Power Rating |
10 kVA (43.5 Amps) |
Type |
AC Voltage Stabiliser / Regulator |
Design Topology |
Servo-Electronic / Electro-Dynamic |
Input |
196 to 264 Volts, Single Phase, 2 Wire, 50/60Hz |
Output |
230V ±1% (adjustable 220-240V), Single Phase, 2 Wire, 50/60Hz |
Max Input Current |
52 Amps @ Minimum Input Volts & Full Load |
Input & Output Power Terminals |
Hardwire - Screw Terminals (+ Universal Output Socket - max rating 10 Amps) |
Features
Automatic Voltage Regulation |
Yes |
Spike & Surge Protection |
Yes |
Auto Restart on Utility Mains Failure |
Yes |
Front Display Panel |
Yes - Status Indication with Output Voltage Analogue Metering |
Status Indication |
LED - Normal (Green), Over Volts (Red), Under Volts (Red) & Output (Green) |
Interface |
No |
Input Protection |
Circuit Breaker (MCB) |
Bypass |
Electronic Controls Bypass Switch |
International Standards Compliance |
Yes - including CE & UKCA Certification |
Warranty |
3 Years /36 Months (RTB) |
Physical
Construction |
Free-Standing Enclosure on Feet to IP20 / NEMA 1 Style - BS/EN 60529 |
Colour |
RAL 7032 (Pebble Grey) |
Sizes & Weights (Unpacked) |
200(W) x 260(H) x 430(D)mm - Wt 27Kg |
Sizes & Weights (Packed) |
30(W) x 36(H) x 50(D)cm - Wt 28.7Kg |
Applications
mSVS Series Servo Electronic / Electro-Dynamic Voltage Stabilisers are suitable for 98% of all applications, being particularly popular for more industrial-style applications where a highly endurable regulation solution is required.
Voltage Regulation for EV Chargers
One of the most popular applications in recent times for the SVS-10H-S15 Stabiliser is home fast EV Charging Points.
Most EV Chargers are designed such that if the incoming utility supply voltage goes outside the 230V ±10% window, they shut down, protecting the Charger and connected EV battery from damage.
It’s not uncommon for mains supplies to exceed the +10% (Single Phase 253V) voltage limit; this can occur at night times when the loading on the supply network is reduced or because the local DNO (Distribution Network Operator) tapping up the supply voltage at the sub-station to cope with increased demand in the area.
EV owners usually charge their vehicles at home overnight while asleep, so waking up to find their car has not charged because the Charger has cut out can be highly annoying.
Typical 7kW EV Chargers the Stabiliser can support include -
· Myenergi Zappi - 7kW
· Ohme Home Pro / e Pod - 7kW
· Wallbox Pulsar Plus - 7.4kW
· Easee One - 7.4kW
· Hypervolt Home 2.0 & 3.0 - 7kW
· Andersen A2 - 7kW
· Project EV EVA-07S-SE - 7.3kW
· Rolec WallPod - 7.3kW
· EO Mini Pro 2 - 7.2kW
· EVBox Elvi - 7.4kW
· Pod Point Solo 3 for Home - 7kW